{"title":"Zetsaw Handy H-150 Handle Compatibility","description":"\u003cp\u003eThe replacement blades listed below are compatible and interchangeable with the Zetsaw Handy H-150 Handle. This handle is currently available to buy separately.\u003c\/p\u003e","products":[{"product_id":"zetsaw-handy160-flush-kugihiki-nokogiri-replacement-blade","title":"Zetsaw Handy160 Flush Kugihiki-nokogiri Replacement Blade","description":"\u003ch2\u003eModel No: 15093\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eA replacement blade for the Zetsaw Handy160 Flush Kugihiki-nokogiri Japanese Saw. Predominantly used for the flush trimming of dowels, etc, but can be used to make rip, cross and slant \u003cem\u003e(mitre)\u003c\/em\u003e cuts.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca title=\"Kataba Meaning\" href=\"\/pages\/japanese-saw-terms-glossary#Kataba\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade of these blades have zero \u003cem\u003e“set”\u003c\/em\u003e to the teeth. Thus, it is less likely to scratch or damage your workpiece, when trimming dowels, etc. The teeth are also impulse hardened for greater blade longevity, and have an effective cutting length of 168mm.\u003c\/p\u003e\n\u003cp\u003eIf you're looking for the Zetsaw Hand160 Flush complete saw, then click \u003ca href=\"\/products\/zetsaw-handy160-flush-kugihiki-nokogiri-japanese-saw\" title=\"Zetsaw Hany160 Flush Kugihiki-nokogiri Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e Is very flexible, making it easier to flush trim in awkward areas on your project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZero Set Teeth:\u003c\/strong\u003e This means that the teeth are less likely to scratch or mark the surface of the wood, whilst flush trimming dowels. The teeth have a \u003cem\u003e“Universal”\u003c\/em\u003e configuration, so you can also use this saw for making rip, cross or slant cuts. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst making rip, cross or slant cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca title=\"Zetsaw Blade Replacement Guide [pdf]\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 168mm of effective cutting, with an overall blade length of 204mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.4mm [18. TPI].\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.5mm. Cuts with the Zetsaw Handy160 Flush produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56351090409845,"sku":"ZS15093","price":6.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Handy160-Flush-Blade-00a.webp?v=1763299020"},{"product_id":"zetsaw-utility-flush-h-240-kugihiki-nokogiri-replacement-blade","title":"Zetsaw Utility Flush H-240 Kugihiki-nokogiri Replacement Blade","description":"\u003ch2\u003eModel No: 08049\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eA replacement blade for the Zetsaw Utility Flush H-240 Kugihiki-nokogiri Japanese Saw. Marketed squarely at the plumber\/tradesperson, this saw is used for the flush trimming of large diameter PVC\/PE plastic pipes.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade of these blades have zero \u003cem\u003e“set”\u003c\/em\u003e to the teeth. Thus, it is less likely to scratch or damage any surface, when trimming plastic pipes. The teeth are also impulse hardened for greater blade longevity, and have an effective cutting length of 212mm.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e Is very flexible, making it easier to flush trim in awkward areas on your job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZero Set Teeth:\u003c\/strong\u003e This means that the teeth are less likely to scratch or mark any surface, when trimming plastic pipes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst making cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca title=\"Zetsaw Blade Replacement Guide [pdf]\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 212mm of effective cutting, with an overall blade length of 253mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.6mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.5mm [17 TPI].\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.6mm. Cuts with the Zetsaw Utility Flush H-240 Kugihiki-nokogiri Japanese Saw produce less waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56351326929269,"sku":"ZS08049","price":7.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Utility-Flush-H-240-Blade_00a.webp?v=1763303217"},{"product_id":"zetsaw-cross-h-265-replacement-blades","title":"Zetsaw Cross H-265 Replacement Blades","description":"\u003ch2\u003eModel No: 15004\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement Blades for the Zetsaw Cross H-265 Japanese Saw. An Anahiki-nokogiri crosscut saw, that was traditionally used for cutting logs, beams and other rough dimensioning work. Today, it is the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has teeth that are impulse hardened for greater blade longevity, and has an effective cutting length of 265mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Cross H-265 Japanese Saw complete, then click \u003ca href=\"\/products\/zetsaw-cross-h-265-japanese-saw\" title=\"Zetsaw Cross H-265 Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kyusunme\" title=\"Kyusunme Meaning\"\u003e\u003cstrong\u003eKyusunme\u003c\/strong\u003e\u003c\/a\u003e length blade is ideal for cross cutting swiftly and precisely, even on thick beams and other wood stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross Cut Teeth:\u003c\/strong\u003e Dedicated cross cut teeth specifically designed for smooth cuts across the grain of solid wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 265mm of effective cutting, with an overall blade length of 299mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.6mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.75mm [15 TPI].\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.92mm. Cuts with Zetsaw Cross H-265 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56436106068341,"sku":"ZS15004","price":5.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Cross-H-265-Blade_00a.webp?v=1764858004"},{"product_id":"zetsaw-cross-h-250-replacement-blades","title":"Zetsaw Cross H-250 Replacement Blades","description":"\u003ch2\u003eModel No: 15007\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Cross H-250 Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, it is the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has teeth that are impulse hardened for greater blade longevity, and has an effective cutting length of 250mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Cross H-250 Japanese Saw complete, then click \u003ca href=\"\/products\/zetsaw-cross-h-250-japanese-saw\" title=\"Zetsaw Cross H-250 Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e The \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Hassunme\" title=\"Hassunme Meaning\"\u003e\u003cstrong\u003eHassunme\u003c\/strong\u003e\u003c\/a\u003e length blade is ideal for cross cutting smoothly and precisely, even on thick beams and other wood stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross Cut Teeth:\u003c\/strong\u003e Dedicated cross cut teeth specifically designed for smooth cuts across the grain of solid wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca title=\"Zetsaw Blade Replacement Guide [PDF]\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 250mm of effective cutting, with an overall blade length of 287mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.40mm [18 TPI].\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.66mm. Cuts with Zetsaw Cross H-250 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56439542743413,"sku":"ZS15007","price":8.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Cross-H-250-Blade_00a.webp?v=1764858004"},{"product_id":"zetsaw-cross-convex-h-265-replacement-blades","title":"Zetsaw Cross Convex H-265 Replacement Blades","description":"\u003ch2\u003eModel No: 15063\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Cross Convex H-265 Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, it is the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca title=\"Kataba Meaning\" href=\"\/pages\/japanese-saw-terms-glossary#Kataba\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has teeth that are impulse hardened for greater blade longevity and has an effictive cutting length of slightly over 265mm, due to the convex cutting edge. \u003c\/p\u003e\n\u003cp\u003eHaving a convex cutting edge, reduces friction whilst making cuts, as fewer teeth are in contact with the wood at any given moment. This curved edge \u003cem\u003e(along with the sawing motion)\u003c\/em\u003e also aids with sawdust removal from the cut. A convex blade is ideal for making rebate \u003cem\u003e(rabbet)\u003c\/em\u003e cuts, through dados and sliding dovetail cuts across the wood grain.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Cross Convex H-265 Japanese Saw complete, then please click \u003ca title=\"Zetsaw Cross Convex H-265 Japanese Saw\" href=\"\/products\/zetsaw-cross-convex-h-265-japanese-saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e The \u003ca title=\"Kyusunme Meaning\" href=\"\/pages\/japanese-saw-terms-glossary#Kyusunme\"\u003e\u003cstrong\u003eKyusunme\u003c\/strong\u003e\u003c\/a\u003e length blade is ideal for cross cutting swiftly and precisely, even on thick beams and other wood stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross Cut Teeth:\u003c\/strong\u003e Dedicated cross cut teeth specifically designed for smooth cuts across the grain of solid wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConvex Cutting Edge:\u003c\/strong\u003e Reduces friction whilst cutting and aids with the removal of sawdust from the cut. Ideal for rebate \u003cem\u003e(rabbet)\u003c\/em\u003e, through dado and sliding dovetail cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e Just over 265mm of effective cutting, with an overall blade length of 299mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.6mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.75mm [15 TPI].\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.88mm. Cuts with Zetsaw Cross Convex H-265 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56439767368053,"sku":"ZS15063","price":12.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Cross-Convex-H-265_00a.webp?v=1764858004"},{"product_id":"zetsaw-cross-h-225-replacement-blades","title":"Zetsaw Cross H-225 Replacement Blades","description":"\u003ch2\u003eModel No: 15019\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Cross H-225 Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, it is the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has teeth that are impulse hardened for greater blade longevity, and has an effective cutting length of 225mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Cross H-225 Japanese Saw complete, then please click \u003ca href=\"\/products\/zetsaw-cross-h-225-japanese-saw\" title=\"Zetsaw Cross H-225 Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e The \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Nanasunme\" title=\"Nanasunme Meaning\"\u003e\u003cstrong\u003eNanasunme\u003c\/strong\u003e\u003c\/a\u003e length blade is ideal if you require the smoothest and most precise cross cuts, when dimensioning timber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross Cut Teeth:\u003c\/strong\u003e Dedicated cross cut teeth specifically designed for smooth cuts across the grain of solid wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 225mm of effective cutting, with an overall blade length of 259mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.4mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.20mm [21 TPI].\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.56mm. Cuts with Zetsaw Cross H-225 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56440108286325,"sku":"ZS15019","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Cross-H-225-Blade_00a.webp?v=1764858004"},{"product_id":"zetsaw-rip-h-250-replacement-blades","title":"Zetsaw Rip H-250 Replacement Blades","description":"\u003ch2\u003eModel No: 15010\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Rip H-250 Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has a variable tooth pitch, making it ideal rip cuts along the grain of solid wood. The teeth are impulse hardened for greater blade longevity, and has an effective cutting length of 250mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Rip H-250 Japanese Saw complete, then please click \u003ca href=\"\/products\/zetsaw-rip-h-250-japanese-saw\" title=\"Zetsaw Rip H-250 Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Hassunme\" title=\"Hassunme Meaning\"\u003e\u003cstrong\u003eHassunme\u003c\/strong\u003e\u003c\/a\u003e length blade is engineered to tackle any rip cutting tasks that may be required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRip Cut Teeth:\u003c\/strong\u003e These teeth have a variable pitch that is specifically designed for fast cuts along the wood grain, and makes for a smooth initial incision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca title=\"Zetsaw Blade Replacement Guide [PDF]\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 250mm of effective cutting, with an overall blade length of 287mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e Variable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.7mm. Cuts with Zetsaw Rip H-250 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56440251318645,"sku":"ZS15010","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Rip-H-250-Blade_00a.webp?v=1764858004"},{"product_id":"zetsaw-universal-h-250-replacement-blades","title":"Zetsaw Universal H-250 Replacement Blades","description":"\u003ch2\u003eModel No: 15270\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Universal H-250 is an Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade of the Zetsaw Universal H-250 Japanese Saw has a Universal tooth configuration. This means that it can be used to make rip, cross and slant \u003cem\u003e(mitre)\u003c\/em\u003e cuts. The teeth are impulse hardened for greater blade longevity, and has an effective cutting length of 250mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Universal H-25 Japanese Saw complete, then please click \u003ca href=\"\/products\/zetsaw-universal-h-250-japanese-saw\" title=\"Zetsaw Univerasl H-250 Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Hassunme\" title=\"Hassunme Meaning\"\u003e\u003cstrong\u003eHassunme\u003c\/strong\u003e\u003c\/a\u003e length blade is engineered to tackle any cutting tasks that may be required of it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Cut Teeth:\u003c\/strong\u003e The universal tooth pattern means this saw can handle any sawing situation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 250mm of effective cutting, with an overall blade length of 287mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.4mm [18TPI]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.66mm. Cuts with Zetsaw Universal H-250 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56446160994677,"sku":"ZS15270","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Universal-H-250-Blade_00a.webp?v=1764858004"},{"product_id":"zetsaw-universal-h-300-replacement-blades","title":"Zetsaw Universal H-300 Replacement Blades","description":"\u003ch2\u003eModel No: 15012\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Universal H-300 Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has a Universal tooth configuration, with a low TPI count. This means that it is to be used to make fairly aggressive rip, cross and slant \u003cem\u003e(mitre)\u003c\/em\u003e cuts. The teeth are impulse hardened for greater blade longevity, and has an effective cutting length of 250mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Universal H-300 Japanese Saw complete, then please click \u003ca href=\"\/products\/zetsaw-universal-h-300-japanese-saw\" title=\"Zetsaw Universal H-300 Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This blade is designed to tackle any aggressive cutting tasks that may be required of it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Cut Teeth:\u003c\/strong\u003e The universal tooth pattern means this saw can handle any sawing situation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca title=\"Zetsaw Blade Replacement Guide [PDF]\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Rattan Handle:\u003c\/strong\u003e The solid wood handle has a full Rattan wrap, providing that traditional Japanese Saw look and feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 300mm of effective cutting, with an overall blade length of 334mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.7mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 2.15mm [12TPI]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 1.07mm. Cuts with Zetsaw Universal H-300 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56446235050357,"sku":"ZS15012","price":12.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Universal_H-300-Blade_00a.webp?v=1764858003"},{"product_id":"zetsaw-rip-h-300-replacement-blades","title":"Zetsaw Rip H-300 Replacement Blades","description":"\u003ch2\u003eModel No: 15013\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eZetsaw Rip H-300 Replacement Blades are interchangeable with the blades of the Zetsaw Universal H-300 Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has a variable tooth pitch, making it ideal rip cuts along the grain of solid wood. The teeth are impulse hardened for greater blade longevity, and has an effective cutting length of 300mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Universal H-300 Japanese Saw complete, then please click \u003ca href=\"\/products\/zetsaw-universal-h-300-japanese-saw\" title=\"Zetsaw Universal H-300 Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This blade is engineered to tackle any rip cutting tasks that may be required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRip Cut Teeth:\u003c\/strong\u003e These teeth have a variable pitch that is specifically designed for fast cuts along the wood grain, and makes for a smooth initial incision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 300mm of effective cutting, with an overall blade length of 334mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.66mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e Variable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.93mm. Cuts with Zetsaw Rip H-300 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56446252941685,"sku":"ZS15013","price":12.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Rip-H-300-Blade-00a.webp?v=1764858005"},{"product_id":"zetsaw-heavy-duty-h-333-replacement-blades","title":"Zetsaw Heavy Duty H-333 Replacement Blades","description":"\u003ch2\u003eModel No: 15015\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Heavy Duty H-333 Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has a Universal tooth configuration, with an extremely low TPI count. Making it able to make quick and aggressive rip, cross and slant \u003cem\u003e(mitre)\u003c\/em\u003e cuts. The teeth are impulse hardened for greater blade longevity, and has an effective cutting length of 333mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Heavy Duty H-333 Japanese Saw, then please click \u003ca href=\"\/products\/zetsaw-heavy-duty-h-333-japanese-saw\" title=\"Zetsaw Heavy Duty H-333 Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This blade is sturdy and tough, making it able to tackle any aggressive cutting tasks that may be required of it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Cut Teeth:\u003c\/strong\u003e The universal tooth pattern means this saw can handle any sawing situation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 333mm of effective cutting, with an overall blade length of 379mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.9mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 2.8mm [9TPI]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 1.30mm. Cuts with Zetsaw Heavy Duty H-333 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56446449811829,"sku":"ZS15015","price":12.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Heavy-Duty-H-333-Blade-00a.webp?v=1764858004"},{"product_id":"zetsaw-universal-h-265-replacement-blades","title":"Zetsaw Universal H-265 Replacement Blades","description":"\u003ch2\u003eModel No: 15076\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Universal H-265 Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has a Universal tooth configuration. This means that it can be used to make rip, cross and slant \u003cem\u003e(mitre)\u003c\/em\u003e cuts. The teeth are impulse hardened for greater blade longevity, and has an effective cutting length of 265mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Universal H-265 Japanese Saw complete, then please click \u003ca href=\"\/products\/zetsaw-universal-h-265-japanese-saw\" title=\"Zetsaw Universal H-265 Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kyusunme\" title=\"Kyusunme Meaning\"\u003e\u003cstrong\u003eKyusunme\u003c\/strong\u003e\u003c\/a\u003e length blade is engineered to tackle any cutting tasks that may be required of it. Can be used on sawn wood, plywood, and laminates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Cut Teeth:\u003c\/strong\u003e The universal tooth pattern means this saw can handle any sawing situation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 265mm of effective cutting, with an overall blade length of 299mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.6mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.75mm [15TPI]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.92mm. Cuts with Zetsaw Universal H-265 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56448212730229,"sku":"ZS15076","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Universal-H-265-Blade-00a.webp?v=1764858005"},{"product_id":"zetsaw-hardwood-h-250-replacement-blades","title":"Zetsaw Hardwood H-250 Replacement Blades","description":"\u003ch2\u003eModel No: 15204\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Hardwood H-250 Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has a Universal tooth configuration, specifically designed for cutting Oak, Mahogany, Walnut, etc. It can be used to make rip, cross and slant \u003cem\u003e(mitre)\u003c\/em\u003e cuts. The teeth are impulse hardened for greater blade longevity, and has an effective cutting length of 250mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Hardwood H-250 Japanese Saw Complete, then please click \u003ca title=\"Zetsaw Hardwood H-250 Japanese Saw\" href=\"\/products\/zetsaw-hardwood-h-250-japanese-saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This \u003ca title=\"Hassunme Meaning\" href=\"\/pages\/japanese-saw-terms-glossary#Hassunme\"\u003e\u003cstrong\u003eHassunme\u003c\/strong\u003e\u003c\/a\u003e length blade is engineered to tackle any hardwood \u003cem\u003e(Oak, Mahogany, Walnut, etc.)\u003c\/em\u003e cutting tasks that may be required of it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Cut Teeth:\u003c\/strong\u003e The universal tooth pattern means this saw can handle any sawing situation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca title=\"Zetsaw Blade Replacement Guide [PDF]\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 250mm of effective cutting, with an overall blade length of 287mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.75mm [15TPI]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.68mm. Cuts with Zetsaw Hardwood H-250 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56448406716789,"sku":"ZS15204","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Hardwood-H-250-Blade_00a.webp?v=1764858004"},{"product_id":"zetsaw-cross-convex-h-300-replacement-blades","title":"Zetsaw Cross Convex H-300 Replacement Blades","description":"\u003ch2\u003eModel No: 15064\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(193, 0, 0);\"\u003e*Discontinued*\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eZetsaw Cross Convex H-300 Replacement Blades are interchangeable with the blades of the Zetsaw Universal H-300 Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has teeth that are impulse hardened for greater blade longevity and has an effictive cutting length of slightly over 300mm, due to the convex cutting edge. \u003c\/p\u003e\n\u003cp\u003eHaving a convex cutting edge, reduces friction whilst making cuts, as fewer teeth are in contact with the wood at any given moment. This curved edge \u003cem\u003e(along with the sawing motion)\u003c\/em\u003e also aids with sawdust removal from the cut. A convex blade is ideal for making rebate \u003cem\u003e(rabbet)\u003c\/em\u003e cuts, through dados and sliding dovetail cuts across the wood grain.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Universal H-300 Japanese Saw complete, then please click \u003ca title=\"Zetsaw Universal H-300 Japanese Saw\" href=\"\/products\/zetsaw-universal-h-300-japanese-saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This blade is ideal for cross cutting swiftly and precisely, even on thick beams and other wood stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCross Cut Teeth:\u003c\/strong\u003e Dedicated cross cut teeth specifically designed for smooth cuts across the grain of solid wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConvex Cutting Edge:\u003c\/strong\u003e Reduces friction whilst cutting and aids with the removal of sawdust from the cut. Ideal for rebate \u003cem\u003e(rabbet)\u003c\/em\u003e, through dado and sliding dovetail cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca title=\"Zetsaw Blade Replacement Guide [PDF]\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e Just over 265mm of effective cutting, with an overall blade length of 299mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.7mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 2.15mm [12 TPI].\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 1.00mm. Cuts with Zetsaw Cross Convex H-300 Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56448433324405,"sku":"ZS15064","price":7.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Cross-Convex-H-300-Blade-00a.webp?v=1764858005"},{"product_id":"zetsaw-handy200-daikume-replacement-blades","title":"Zetsaw Handy200 Daikume Replacement Blades","description":"\u003ch2\u003eModel No: 15087\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Handy200 Daikume Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has a Universal tooth configuration. This means that it can be used to make rip, cross and slant \u003cem\u003e(mitre)\u003c\/em\u003e cuts. The teeth are impulse hardened for greater blade longevity, and has an effective cutting length of 200mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Handy200 Daikume Japanese Saw complete, then please click \u003ca title=\"Zetsaw Handy200 Daikume Japanese Saw\" href=\"\/products\/zetsaw-handy200-daikume-japanese-saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e This tapered, rounded front end of the blade, allows it to be inserted in to confined or awkward spaces, making cuts at acute angles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Cut Teeth:\u003c\/strong\u003e The universal tooth pattern means this saw can handle any sawing situation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 200mm of effective cutting, with an overall blade length of 235mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.75mm [15TPI]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.70mm. Cuts with Zetsaw Handy200 Daikume Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56448636584309,"sku":"ZS15087","price":4.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Handy200-Daikume-Blade_00a.webp?v=1764858004"},{"product_id":"zetsaw-handy200-fine-replacement-blades","title":"Zetsaw Handy200 Fine Replacement Blades","description":"\u003ch2\u003eModel No: 15089\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw Handy200 Fine Anahiki-nokogiri Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e \u003cem\u003e(single-edged)\u003c\/em\u003e blade has a Universal tooth configuration. This means that it can be used to make rip, cross and slant \u003cem\u003e(or mitre)\u003c\/em\u003e cuts. The teeth are impulse hardened for greater blade longevity, and has an effective cutting length of 200mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw Handy200 Fine Japanese Saw complete, then please click \u003ca href=\"\/products\/zetsaw-handy200-fine-japanese-saw\" title=\"Zetsaw Handy200 Fine Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba [Single-Edged] Blade:\u003c\/strong\u003e This tapered, rounded front end of the blade, allows it to be inserted in to confined or awkward spaces, making cuts at acute angles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Cut Teeth:\u003c\/strong\u003e The universal tooth pattern means this saw can handle any sawing situation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePull Saw:\u003c\/strong\u003e Cutting on the pull stroke, rather than the push stroke, reduces the risk of blade flex whilst cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 200mm of effective cutting, with an overall blade length of 235mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.40mm [18TPI]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 0.66mm. Cuts with Zetsaw Handy200 Fine Replacement Blades produce less sawdust and reduce wood waste, than conventional Western saws.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56448762806645,"sku":"ZS15089","price":8.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Handy200-Fine-Blade_00a.webp?v=1764858005"},{"product_id":"zetsaw-v-handy200-board-replacement-blades","title":"Zetsaw V Handy200 Board Replacement Blades","description":"\u003ch2\u003eModel No: 18422\u003c\/h2\u003e\n\u003ch3\u003eDescription:\u003c\/h3\u003e\n\u003cp\u003eReplacement blades for the Zetsaw V Handy200 Board Folding Japanese Saw. Traditionally, Anahiki-nokogiri were crosscut saws, used for cutting logs, beams and other rough dimensioning work. Today, anahiki-nokogiri are the most popular carpentry saw amongst Japanese woodworkers, as it's ideal for cutting across various types of solid wood.\u003c\/p\u003e\n\u003cp\u003eThis \u003ca href=\"\/pages\/japanese-saw-terms-glossary#Kataba\" title=\"Kataba Meaning\"\u003e\u003cstrong\u003eKataba\u003c\/strong\u003e\u003c\/a\u003e blade has a specifically designed, symetrical tooth pattern for the cutting of drywall and plasterboard sheets. The blade has a Saw Coat coating to reduce resistance and clogging of the teeth, whilst aiding smoother cuts. It also has an effective cutting length of 190mm.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for the Zetsaw V Handy200 Board Folding Japanese Saw complete, then please click \u003ca href=\"\/products\/zetsaw-v-handy200-board-folding-japanese-saw\" title=\"Zetsaw V Handy200 Board Folding Japanese Saw\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to purchase.\u003c\/p\u003e\n\u003ch3\u003eBenefits \u0026amp; Features:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKataba Blade:\u003c\/strong\u003e The Saw Coat coating on this blade provides reduced cutting resistance and clogging of the teeth, and aids a smoother cutting action.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSymetrical Cut Teeth:\u003c\/strong\u003e The specially ground tooth pattern allows for cuts on both the push and pull strokes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePocket Cutting:\u003c\/strong\u003e The blade allows for pocket-cutting holes in the middle of drywall and plasterboard sheets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Replacement System:\u003c\/strong\u003e Reduces the need to get teeth sharpened and re-set, when in the middle of a project. Simply replace the blade and continue on with what you were doing. This system also means you will not have to buy a complete new saw, should the blade break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook Fixing:\u003c\/strong\u003e For easy and speedy blade replacement. No need to have multiple saws, just swap the blade out for different tasks, with compatible blades. Great for smaller workshops with limited storage space. Click \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw_Blade_Replacement_Guide.pdf?v=1759240538\" title=\"Zetsaw Blade Replacement Guide [PDF]\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e to download the PDF guide on replacing the blades on saws with hook fixing blades.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImpulse Hardening Technology:\u003c\/strong\u003e Treating the teeth in this way helps keep them sharp for much longer than conventional methods. Whilst the core of the blade remains tough, yet flexible, to reduce bending and buckling during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 190mm of effective cutting, with an overall blade length of 223mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e 0.7mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Pitch:\u003c\/strong\u003e 1.40mm [18TPI]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKerf:\u003c\/strong\u003e 1.05mm. Cuts with Zetsaw V Handy200 Board Replacement Blades produce a cleanly severed edge, which reduced the need of the board edge to be deburred or chamfered.\u003c\/p\u003e","brand":"Zetsaw","offers":[{"title":"Default Title","offer_id":56493877428597,"sku":"ZS18422","price":7.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0919\/7761\/3685\/files\/Zetsaw-Handy200-Board-Blade_00a.webp?v=1765211993"}],"url":"https:\/\/www.silverhandstore.com\/collections\/zetsaw-handy-h-150-handle-compatibility.oembed","provider":"Silverhand Store","version":"1.0","type":"link"}